Lubrication System Simulator

Oil is stored in the integral engine sump and returns there by gravity.

Animated wet-sump oil circuit based on Figure 1 Blue supply oil leaves the integral sump through the suction screen. The pressure pump sends oil through the pressure screen and filter/cooler to oil galleries and bearings. Amber oil returns by gravity or through the pressure-relief valve. Oil tankScavenge pump Filler / dipstick Suction screen Integral sumpOil stored here Pressure pump Relief valve Pressure screen Filter / cooler Pressure tap Oil galleriesand bearings
Illustrative oil pressure gauge OIL PRESSURE PSI
Supply / pressure Relief return Gravity return

Oil pressure 0 psi

Relief valve Closed

Oil is circulating through the bearings and draining back to the sump.

Wet- and conventional dry-sump examples based on Figure 1. Flow and pressure are illustrative; pump, cooler, and relief routing vary by engine. The dry-sump example uses a scavenge pump and return-line cooler, with pressure relief returning to the pump inlet. Cold oil has greater resistance to flow. FAA lubrication systems reference